Karmann-Mobil Dexter 580 2020, Operating Manual

Page: 55 / 75

Page |
55
1 – Water
The water system must be drained completely to avoid the risk of mould formation or frost.
•
Draining fresh water
Turn off the power at the control panel.
Open the fresh water drain valve.
Open all taps to ensure complete drainage.
To finish the draining process, start the pump and let it run for some
time, keeping the taps open during this time.
Fresh water drain valve
•
Draining the waste water
Before you start draining, clean the kitchen sink, the wash basin
and the shower.
In order to drain the waste water tank, it is sufficient to pull the
lever on the left side of the vehicle near the rear wheel.
Handle to drain the waste water tank
Waste water can only be drained at dedicated locations like roadside service areas, waste disposal
stations or public and private sanitary facilities.
•
Draining the boiler
Turn off the pump on the control panel and open all
hot water taps.
Turn the rotary knob of the drain valve (Frost Control)
by 90°.
until it clicks into place. The pressure switch is released
from the engaged position and the drain valve opens.
The water from the boiler is now drained outside via the drain valve. Place a container under the outlet
to ensure that the boiler has been completely emptied (about 10 litres).
Switch in
" Off " -Position
Pressure switch pops out