12
4.3.2 Stand-up Function
1.Press the power button on. (red button
on the battery cover)
2.
Push the up-button to access to the
standing position.
3.
Push the down-button to access to
the seating position.
1.Charger socket
2. Breaker
3. Controller joint
These two batteries (2x2.7 Ah) have
autonomy
of
120
stand-up
cycles
(seat/stand/seat).
Should the battery level indicate to red
area, indicating that the batteries need
charging. From there on, the autonomy is
down to 10 cycles. We recommend to the
end user to come back to seating and
recharge the batteries before using this
function again.
To charge the batteries, press the power
button on, insert the charger plug into the
socket and charger into a 110/220 Volts
plug socket. The light signal on the
charger shows an orange light while on
charge. Once the batteries are full, the
charger will indicate a green light.
Remove the charger from the plug socket
first and then from the charger socket.
To fully charge the batteries takes 4 to 5
hours.
2.Power Button
1.Battery Indicator