10
To adjust, remove bolt, slide knee support to desired height and put the bolt back.
Tighten securely. The upper edge of the knee support has to be below the patella.
(See Fig. 4.17)
C. Angle adjustment
：
Loosen the fitting screws from the knee-supports and proceed with angle
adjustment according to the morphology of the user. (See Fig. 4.18)
Once adjusted, tighten up the screws securely.
D. Adjustment in the width
：
Loosen up the fitting screws from the knee-supports and
proceed with width adjustment right and left within the tube limits. (See Figure
4.19) Once adjusted, tighten up the screws securely.
CAUTION:
These adjustments will have to be optimized after a progressive standing
session.This will enable to avoid exaggerated pressure on the knees and to
guarantee a good alignment of the limbs.
Figure 4.16
Figure 4.17
Figure 4.18
Figure 4.19
Figure 4.20
4.2.5 Back Upholstery
When upholstery is loose, you can tighten which by pulling and re-attaching the
Velcro. (See Figure 4.20)
4.2.6 Chest strap height
The chest strap can be fitted at two different height between the upholstery fastening
strip and backrest tube.
To adjust height, remove the screw, put the chest strap to the desired height and put
the screw back. Tighten securely (see Fig.4.21)
Secure the trunk with chest strap and safety buckle. The chest strap is adjustable
according to the morphology of the end user. ( see Fig.4.22)