Karma Morgan M, User Manual

Page: 59 / 96

54
For seat tilt, now pull the joystick towards the user and the seat tilt will start to
tilt backwards. As long as you pull the joystick backwards, the seat tilt will tilt
backwards. Release the joystick and the seat tilt movement will stop. Push the
joystick forward and the seat will tilt into forward position.
For backrest recline, now pull the joystick towards the user and the backrest
recline will start to recline backwards. As long as you pull the joystick
backwards, the backrest recline will recline backwards. Release the joystick
and the backrest recline movement will stop. Push the joystick forward and the
backrest will recline into forward position.
17 Handling the mechanical brakes
The drive motors of the wheelchair have electromechanical brakes. The brake
can be released to set the wheelchair into freewheel mode. In freewheel mode
the wheelchair can be pushed. This might be necessary to move the
wheelchair in certain cases.
17.1 Release the mechanical brakes
To release the mechanical brakes, take the following steps:
Look for the red lever on each side of the driving motor.
Around the lever is an instruction sticker which shows the direction to open or
lock the mechanical brake. Move the lever into the "open" position on each
motor. Now the wheelchair is in freewheel mode and can be pushed.
To lock the brakes, move the lever into the "lock
” position on both motors.
The acceleration and speed of each seat function can be programmed by
your local authorized supplier. Should you request a different setting,
please contact you r local authorized supplier.