Karma Morgan M, User Manual

Page: 56 / 96

51
15 Driving the wheelchair
The wheelchair is designed for indoor and outdoor use. When driving indoors,
you must be careful when driving in, for example, narrow passageways, when
passing through doors and entryways as well as when using elevators, ramps,
etc. Also be aware of the risk of things getting caught in the machinery when
you use the electrical seat lift and seat tilt, in particular when the wheelchair
has been run in under a table, workbench or something like that.
Outdoors, you must remember to drive very slowly on steep downhill slopes
and to be very careful when driving on uneven surfaces, on uphill slopes, with
sideways slopes and when negotiating obstacles. Always maintain a safe
distance from the edge when driving close to drop-offs and pavements.
15.1 Driving in general
Make sure that the control system is mounted right, and that the joystick
position is correct. The hand or limb you use to operate the joystick should be
supported, for example by the wheelchair armrest. Do not use the joystick as
the sole support for your hand or limb, the wheelchair movements and bumps
could upset your control, which might result in uncontrolled driving.
1. Switch on the power by pressing the on/off button on the control panel.
2. Select the right profile (start with the indoor profile) Preferable to begin with
a low driving speed.
We recommend that you should make repeated test drives in areas in which
you know you feel secure so that you are quite familiar with how the
wheelchair and its accessories behave in different situations before you
begin using the wheelchair on normal roads and other public areas.
Always make sure the wheelchair is switched off before entering or leaving
the wheelchair. If the wheelchair is switched on during transferring, there is
a danger the joystick will be touched and the wheelchair will move.