Karma Morgan KISS Seat User Manual Download | Manualshive

Page: 81 / 116

background image

81

17.5. transportation using Dahl docking station.

Morgan has also been crash tested using a Dahl docking station tie down system according to 7176-19:2008

and 10542-1:2012 SWM, where the wheelchair is facing forward in driving direction (driving direction like

the driver seat).

Morgan crash test using Dahl Docking station.

The locking of the wheelchair into the Dahl Docking station make it much easier to lock down the

wheelchair for occupied transportation. It can be used also for wheelchair users who want to drive the car

by themselves.

The system is self-locking and can be release by pushing a button. The locking device will open for a certain

time to make the un docking possible.

WARNING

The Dahl Docking station is only allowed to build in to a vehicle by trained and authorized staff
of a registered car adaptation company. For ordering the Dahl Docking and its accessories,
please contact Dahl Engineering in Denmark for further details. You can find Dahl at
www.dahlengineering.dk

«
...
79
80
81
82
83
...
»

Summary of Contents for Morgan KISS Seat





















































































































Reviews:

No comments

Related manuals for Morgan KISS Seat

Brand: VA Health care Pages: 18

Brand: Pride Mobility Pages: 34

Everest Jennings PURETILT PT3000-18

Brand: Graham Field Pages: 32

Brand: Z-Tec Pages: 4

Brand: Days Pages: 12

Brand: CHEELCARE Pages: 33

Brand: Blumil Pages: 12

Brand: Küschall Pages: 32

Brand: Borringia Pages: 8

R-Net BLUETOOTH

Brand: Sunrise Medical Pages: 3

Brand: AAT Pages: 40

Brand: Otto Bock Pages: 124

Brand: VELTOP Pages: 2

Height Adjustable Toilet Seat and Frame

Brand: NRS Healthcare Pages: 2

Brand: Oracing Wheelchairs Pages: 31

Brand: Medline Pages: 14

Breezy BasiX2 Plus

Brand: Sunrise Medical Pages: 92

Brand: Sunrise Medical Pages: 116

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands