Karma Morgan KISS Seat User Manual Download Page 40 | Manualshive

Page: 40 / 116

Karma Morgan KISS Seat User Manual Download Page 40

40

14. Chassis

14.1. Freewheel Lever

The Morgan series is supplied with freewheel lever devices to allow manual pushing of the powered

wheelchair if required. The freewheel lever is at the axle of the rear wheels.

Freewheel Mode: Turn both left and right-side lever down to the upmost position. The wheelchair will now

roll freely.

Drive Mode: Turn both levers upwards to the highest position. The wheelchair can be driven by motor

power. Ensure the lever is at the drive mode position.

CAUTION

Always ensure that the wheelchair is in Drive Mode before using the wheelchair. (i.e. Before
turning on the controller). When the wheelchair is in Freewheel Mode, make sure that there's an
attendant that can offer assistance.

14.2. Tyres

The rear wheels and the casters are pneumatic tires or solid PU filled tyres. Please, refer to the tires

pressure specified on the tire walls to maintain the tires at

the correct pressure. Do not let anyone touch

the wheels when the wheelchair is in motion to avoid pinch injury.

CAUTION

always ensure the tyres pressure is okay. To low tyres pressure or uneven tyre pressure can
influence the driving characteristics and control of the wheelchair dramatically.

«
...
38
39
40
41
42
...
»

Summary of Contents for Morgan KISS Seat





















































































































Reviews:

No comments