Karma KP-80, Owner'S Manual, Page: 34 / 60

22
5.4.2 Arm Support
5.4.2.1 Height Adjustment
(5different positions) Remove
the screws from the back
support tube, adjust The
desired height and put back
the screws. Tighten securely.
(See Figure 5.4.4).
Figure 5.4.4
Figure 5.4.5
5.4.2.2 Swing Backward
To make side transfer easy, the chair is equipped with swing away
arm support. Lift and awing backward to remove. (See Figure 5.4.5)
5.4.3 Knee Support
Before standing, it is important to adjust the knee support in depth
and height and to adjust the u-formed knee supports in the angle
and width.
5.4.3.1 Adjustment in the depth
Screw or unscrew the adjusting bolt until you have reached the
desired depth. Keep 3 to 4 cm between the knee of the user and
the knee support. (See Figure 5.4.6)
5.4.3.2 Adjustment in height (3 different height )
To adjust, remove bolt, slide knee support to desired height and
put the bolt back. Tighten securely. The upper edge of the knee
support has to be below the patella. (See Figure 5.4.7.)
5.4.3.3 Angle Adjustment
Loosen the fitting screws from the knee support and proceed with
angle adjustment according to the morphology of the user. (See
Figure 5.4.8.)
5.4.3.4 Adjustment in the width
Loosen up the fitting screws from the knee supports and proceed
with width adjustment right and left within the tube limits.