27
5.27.2.2 Take the brakes off and reverse the wheelchair to tension the
front straps. Apply the wheelchair brakes (the brakes should be
left on during transport)
5.27.3 Fitting the rear restraint
5.27.3.1 Attach rear straps into the rail approximately 300 mm behind
the wheelchair backrest.
5.27.3.2 Attach the hooks to the wheelchair brackets at the rear of the
wheelchair as pictured below. Tension the restraint until the
wheelchair is secure.
Fitting the front restraint
Fitting the rear restraint
5.28 Fitting the Seat Belt
5.28.1 Fasten the three point safety belt around the user.
5.28.2 The occupied wheelchair should be located in a forward-facing
configuration, with the parking brake applied.
5.28.3 Pelvic restraints should make full contact across the front of the
body near the junction of the thigh and pelvis as pictured below
(correct seat belt position).
5.28.4 Restrains should not be held away from body by wheelchair
components such as armrest or wheels as pictured below
(Incorrect seat belt position).
Summary of Contents for KP-20 Series
