17
※ The footrests are designed to carry 100 kg each.
4.1.3.7 Footplate
4.1.3.7.1 Height
To adjust the footplate height, follow these
instructions listed below.
● Use the KARMA tool provided to loosen the bolt at the
end of the footrest arm.
● Adjust to required height and tighten. (See Figure 4.30)
● Make sure that the footplate height is adjusted properly
according to the user's calf length to reduce pressure on
the body.
Figure 4.30
Figure 4.31
4.1.3.7.2 Longitudinal (Fore/Aft) Position
To fit the occupant's leg position and flexibility, follow
the instructions listed below:
● Remove the footplate fastener bolts on each plate.
● Adjust the plate position on the footplate support tube
below as desired and,
● Re-tighten the footplate fastener bolts. (See Figure 4.31)
4.1.3.7.3 Lateral (Sideways) Position
To open or close the gap between the footplates,
follow the instructions listed below.
● Loosen the footplate fastener bolts on each plate.
● Adjust the plate position as desired and re-tighten the
Summary of Contents for KM-BT10
Page 1: ...Manual Wheelchair Owner s Manual KM BT10...
Page 2: ......
