14
Figure 4.21
Figure 4.22
4.1.3.4 Rear Wheel
Quick-release wheels are available as optional. Please
follow the instructions listed below.
4.1.3.4.1 Rear Wheel Disassembly
● Ensure that the manual brake is in the unlocked position
first.
● Support the weight of the chair with one hand by holding
the push handle.
● Depress the hub cover and hold down the quick-release
mechanism.
● Remove the wheel. (See Figure 4.23)
4.1.3.4.2 Rear Wheel Assembly
● Ensure that the manual brake is in the OFF (unlocked)
position first.
● Take up the assembled wheel and axle and depress the
button in the centre of the axle as mentioned above.
● This retracts the ball bearings that will allow you to push
the axle into the wheel bracket that is located on the lower
rear frame of the wheelchair.
● When you remove your thumb from the button on the axle,
the ball bearings should be visible protruding from the axle
at the back of the wheel bracket. This will secure the wheel
safely in the frame. (See Figure 4.24 at the next page)
Summary of Contents for KM-BT10
Page 1: ...Manual Wheelchair Owner s Manual KM BT10...
Page 2: ......
