Karma KM-BT10, Owner'S Manual

Page: 21 / 48

15
Figure 4.23 Figure 4.24
CAUTION:

You must make sure that the axle is fully located in the
wheelchair bracket and that the ball bearings are fully open and
have positively attached the wheel in the frame.

The rear wheel can be mounted at different positions on the
frame to alter the seat height and overall stability of the chair.
Changing the wheel position should be carried out by
authorized dealer or qualified therapist.
4.1.3.4.3 Important Do's and Don'ts
● DO keep the axles clean and lubricated with light oil or
maintenance spray.
● DO maintain the correct tyre pressure if using pneumatic
tyres.
● DON'T try to remove the wheels while the wheelchair is
occupied even when it is equipped with anti-tippers.
4.1.3.5 Footrest
Footrests can be swung away, which makes transferring
out easier.
4.1.3.5.1 To remove the footrest, press the release pin first and
rotate the footrest until it faces outwards.
4.1.3.5.2 To attach the footrest, locate it on the frame plug at
about 90 degrees (perpendicular) to the side of the
frame and rotate inwards until you hear a “click”