background image

 

 

 

 

24

It does not require any maintenance but should be inspected every month to ensure 
that the edges are not frayed and weekly to make sure that it correctly fits the user. If 
there are any signs of deterioration, please replace it immediately 

 

5. INSPECTION AND MAINTENANCE 

5.1 Daily Check 

Check the following items before traveling. If you find anything abnormal, visit your 
KARMA wheelchair dealer for further inspection before using it. 

5.1.1 Examine brakes, checking for wear, damage and misalignment. Replacing or 

adjusting the brakes should be carried out by your approved repairer. 

5.1.2 Check that the handgrips are not damaged and are securely bonded to the 

push handles. 

5.1.3 Check the anti-tippers are not damaged and are securely attached. 
5.1.4 Check that the anti-tippers' wheels and frame are not damaged and are 

securely mounted. 

5.1.5 Before using the wheelchair, make sure all nuts and bolts are tight. Check all 

parts for damage or wear and have a qualified technician replace it if necessary. 
Check all parts for proper adjustment. Inspect brakes for proper operation. 

5.1.6 The wheels and tires should be checked periodically for cracks and wear, and 

should be replaced by a qualified technician. 

5.1.7 A qualified technician can be found at an authorized distributor/dealer. 

 

 

 

CAUTION: 

 

Visit a KARMA wheelchair dealer for inspection and maintenance if you find 

anything abnormal. 

 

5.2 Regular Maintenance Record 

To make sure your wheelchair is in good condition, visit your KARMA wheelchair 
dealer regularly for maintenance (and keep records accordingly) every six months 
after purchasing. 
A maintenance/service fee may apply. 
 

 

Summary of Contents for Ergo Lite KM-2501













































Reviews: