22
Tension the restraint until the wheelchair is secure.
Fitting the front restraint
Fitting the rear restraint
4.5.13 Fitting the Seat Belt
4.5.13.1 Fasten the three point safety belt around the user
4.5.13.2 The occupied wheelchair should be located in a forward-facing
configuration, with the parking brake applied
4.5.13.3 Pelvic restraints should make full contact across the front of the body near
the junction of the thigh and pelvis as pictured below (correct seat belt
position).
4.5.13.4 Restraints should not be held away from body by wheelchair components
such as armrest or wheels as pictured below (Incorrect seat belt position).
Correct seat belt position
Incorrect seat belt position
4.6 Pelvic Belt (Option)
How to Assemble and Disassemble the Pelvic Belt
4.6.1 Loosen the fourth and fifth screws of both side of seat upholstery and insert
the pelvic belt in between the fourth and fifth screw holes. (Figure 4.30)
4.6.2 Keep the pelvic belt in 45 degrees for comfortable usage. (Figure 4.31)
4.6.3 Put the seat upholstery back and re-tighten screws. Do not drive the screws
through the belt.
Summary of Contents for Ergo Lite KM-2501
