©
Karma Limbo
(aka James Thompson) February 2008
Page 6 of 7
7a.
7b.
7c.
STEP 8:
INSTALL LENSE
To re-secure the lense in place, I use double sided tape. Remove any residual adhesive from the lens
and front case using your fingernail. Cut small pieces of double sided tape, and put in the places
shown in image 8a. Before you peel the backing off the tape and put the lense in place, make sure
you clean the LCD and lense with glass cleaner and blow off any lint. Once all is clean and ready to
go, peel your tape backings off and put the lense in place. You’ll need to start the lense on by
hooking the left edge into the matching holes in the front case (8b), then close it up like a book and
press down firmly (8c). You may have to pry up on the top case a bit if it rubs as you push the lense
down.
8a.
8b.