Instructions for use SOM 62/32/22 LED
21 SOM 62/32/22 LED EN 2017-03
10.3
Switching the device on and off
The main switch (1) of the device is located on the flat side of the swivel arm. The device is ready
to use when the green status light (2) is ON.
The red status light indicates overheating of the electronics.
If the red status light (3) is ON, immediately switch off the device and check the ventilation slits. If
they are dirty, try to remove the dirt with a brush or slightly moist cloth. Then switch the device
back on. If the red status light is still ON, immediately switch off the device and call customer
service.
Figure 15
CAUTION
Do not use the device when the red status light is ON as it can result
in damage to the electronics.
