Storage and processing instructions for PVC sheets
Storage
Check your delivered goods with extreme care,
as later complaints cannot be entertained.
Please observe these storage and
processing instructions. In the event of a
failure to observe these instructions, claims
relating to complaints will not be entertained!
• Avoid heat accumulation and damp.
• Stacked PVC sheets should not be exposed to sunlight and moisture. A risk of overheating exists
(risk of fire through focusing of solar radiation!).
• The maximum storage temperature when stacked should not exceed 60°C. We assume no liability for
damage caused by the focusing of solar radiation in this manner.
• Store on a level, unheated surface and cover with bright tarpaulin impervious to light and water.
• Max. stack height 50 cm
• Max. room temperature: 40°C
• PVC sheets should be protected during storage against the effects of weather, dirt and mechanical loads or
stress.
Installation
• Do not install at temperatures under 5°C.
• Manual transportation of individual sheets necessary for installation should not be realised at wind speeds
exceeding 3m/s.
• When installing double-web sheets, the wall connection side should be fitted with a seal to prevent the
penetration of dust and rainwater.
Sealing tape is not included in the scope of delivery, due to the different attachment options involved.
Cleaning
• The cleaning cycle depends on the level of dirt, but exterior cleaning should be realised at least once a year.
• Remove dirt with water or a household cleaning agent.
• Do not use any scouring or caustic additives or additives containing solvents.
