Connect Frame to Tent
–Insert one end of main tent pole
onto pin, of pin & ring system, at
tent corner. (illus. 4)
–Go to opposite end of pole and
gradually apply pressure to the pole
forming an arch until you are able to
insert the pin into the pole.
–Repeat for second pole.
13 x 11 Outsider
™
Tent
1
Layout & Positioning
of Tent, Pole Assembly
–Layout and position tent with door
facing desired direction. (illus. 1)
–Unzip door.
–Stake down tent corners, and tent
sides using the rings at the end of the
stake loops and the side stake loops.
(illus 2) Keep the floor taut.
–Assemble frame poles by interlocking
shock-corded poles. This will make two
long poles.
–Insert the poles diagonally into pole
sleeves.The center of the poles should
cross forming an “X” in the middle of
tent. (illus. 1)
–Fasten frame tie on top of tent over
both poles. (illus. 1), (illus. 3)
2
When You Are Ready To Set Up
Your Tent
–Select a level campsite clear of rocks,
branches and other hard or sharp objects.
–Do not set up your tent under trees.
–For best results in windy conditions, do not
position the door of tent into the wind.
–See owners manual for more tips.
Rainfly
Pole
Rainfly Part No. 9261-833
Main Tent
Poles
POLE ASSEMBLY PARTS
Assembled poles
inserted through
pole sleeves
Frame tie
Instructions apply to Part Number 9261-131
illus. 1
illus. 2
Tent stake
through ring
illus.4
Insert pole tip onto
pin & ring
Tent frame
set-up
illus. 3
Frame tie
Part No. 9261-831
Part No. 9261-832
