Instructions
–
8006A-Rev 1
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 14
Step 3
–
Mount Side Channels
•
Place the side channels in the orientation shown. Have the correct side channels on the
correct sides. Notice the bend at the rear of each piece. Assembly one side at a time.
•
Rotate the side channels down to rest on the cross bars.
•
Place the clamp around the side
channel tube.
•
Align the holes on the clamp with the
matching clamp holes on the cross
bars.
•
Attach using 5/16” x 1” carriage bo
lts,
5/16” flat washers and 5/16” nyloc
nuts as shown.
•
Repeat at the end of each cross bar
for a total of 4 times.
