Installation Instructions
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 2
Step 4
Bolt strap bracket to small angle bracket in orientation shown. The small
angle bracket will have 5 slots in one side.
Place strap bracket flat against the front-
most side of the 26” shelf.
Align strap bracket with a hole near the top of the shelf side.
Mark the interior side of the van where the small, 5 slot bracket makes
contact. We recommend marking 2-3 holes to install plus nuts.
Remove both brackets and 26” shelf.
Drill into interior side of van to allow for plus nut installation.
*BE SURE NOT TO DRILL INTO ANY WIRES OR IMPORTANT PARTS*
**ALWAYS CHECK THAT IT IS SAFE TO DRILL**
Step 5
Install plusnuts. Bolt 5 slot angle bracket to
previously installed plus nuts using ¼-
20 x 7/8” Hex
head bolt, a split lock washer and a flat washer.
Step 6
Place 26” shelf back into van
.
Mount mid mount bracket that was removed in Step 2
back to the interior side of van.
Align 26” shelf between the 32” shelf and the previously
installed brackets from Step 5
Sandwich mid support bracket in between the 32” and
26” shelves.
Bolt through the 32” shelf, mid mount bra
cket and the
26” shelf using a
¼-
20 x 7/8” hex head bolt, two flat
washers and a nyloc nut.
