For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 5
Installation Instructions
–
408TC
Step 2A
–
Front Mount on 130” WB
(Low/Mid Roof)
•
Locate the other threaded emboss at the front of van. Plugs will need to be removed.
•
Place the long mount rail with the tall flange
to the center of the van.
•
Bolt through the farthest rear slot and the
corresponding front slot in the rail using
M8 x 45mm bolts with lock washers and flat
washers.
•
The rail should be offset to the front of the
van.
•
The picture shown here is the rear most
mount on the rail.
•
Be sure to place sealant around the threads
and under the rubber pad to ensure no water
can leak into the cabin of the van.
