
28
Sounds & Alerts
Signal Beep Option:
¨
When the
Enable
option is selected,
a special warning tone is received for an
incoming call, in case the phone is busy.
¨
The warning tone is cancelled through the
Disable
option.
Keypad Sound:
¨
When the
Enable
option is selected,
a special warning tone is received when a
key is used.
¨
The warning tone after key use is cancelled through the
Disable
option.
Ringer Volume:
Ringer sound volume level can be determined through this sub-menu. By using the
navigation keys, desired volume level is selected within the range 0-12.
Microphone Volume Level:
Microphone volume level can be determined through this sub-menu. By using the
navigation keys, desired volume level is selected as low-medium-high.
Note: Outgoing volume cannot totally be interrupted with this option.
Ring Tone:
Ring Tone can be determined through this sub-menu. By using the navigation keys,
desired ring tone can be selected out of 9 alternatives (00-08). As the ring tone
selection change, the new tone is played to let the user listen.
Ring Cadance:
Through this sub-menu, whether the telephone will ring with the cadence programmed
on system side or on telephone side can be defined. If it is enabled, in this case
telephone will ring with the tone and ring cadence which are programmed on the
system side. If it is disabled telephone will ring with the tone cadence programmed on
the telephone side.
Summary of Contents for ST30
Page 1: ...GRAPHIC DISPLAY FEATURE TELEPHONE SET TECHNICAL REFERENCE AND USER GUIDE 04 2010...
Page 2: ...GRAPHIC DISPLAY FEATURE TELEPHONE SET TECHNICAL REFERENCE AND USER GUIDE MAY 2010...
Page 3: ......
Page 54: ...GRAPHIC DISPLAY FEATURE TELEPHONE SET TECHNICAL REFERENCE AND USER GUIDE 05 2010...