
13
By Code Programming
By “Feature Code” Menu:
The entire functions supported by the exchange can be programmed for ST30
telephone set through the Feature code menu. Any eight-digit code can be assigned to
the programmable keys. That code could be one that is related to user, such as Follow
Me (85), one that is related to the operator, such as Wake Up Service (8389) or one
that is related to the system supervisor, such as entry to the exchange programming
(877777). If the entered code is none of them, then it is taken as an extension number
and this extension number is called directly when this key is used. After accessing the
Key Settings > Feature code submenu, if one of the programmable keys is selected,
one of the corresponding codes is entered for the “no=” option and then if it is
confirmed through the “Accept” key, then the program will have been assigned to the
selected key. (Please refer to the user’s guide of your exchange for information related
to the functions supported by the exchange and the codes to program them.)
By “Auto Setting” Menu:
In ST30 telephone sets, possibility of assigning different functions to the entire keys
simultaneously is provided via the Auto Setting option under the Key Settings menu.
This feature will be explained in detail later in the section “Auto Settings”. Via the
automatic programming, about 20 functions can be programmed at the same time.
These functions can be changed later one by one, as already explained in the sections
above, or they can be cleared through the “Clear All?” option in the same menu.
Summary of Contents for ST30
Page 1: ...GRAPHIC DISPLAY FEATURE TELEPHONE SET TECHNICAL REFERENCE AND USER GUIDE 04 2010...
Page 2: ...GRAPHIC DISPLAY FEATURE TELEPHONE SET TECHNICAL REFERENCE AND USER GUIDE MAY 2010...
Page 3: ......
Page 54: ...GRAPHIC DISPLAY FEATURE TELEPHONE SET TECHNICAL REFERENCE AND USER GUIDE 05 2010...