Karel ST30, Technical Reference And User'S Manual, Page: 34 / 54

26
Feature Code
Any code of 8 digits can be assigned to the programmable keys by using this menu
option.
¨
Press Key: The key, on which the programming will be done, is pressed for a
short or a long period in order to select the first or the second function,
respectively.
¨
Code: This code may be one, such as 85 (Follow Me) that could be applied by a
user, one, such as 8389 (Wake Up service) that could be applied by the operator
or one, such as 877777 (Entry to exchange programming) that could be applied by
the system supervisor. If the entered number is none of these, then it is detected
as an extension number and that extension is called whenever that key is used.
Auto Settings
When selected, 4 different options are presented to the user. Upon any of those
options is selected, extension, line or user features are assigned to the programmable
keys automatically or the entire key assignments that have previously been done are
cleared. As for these options:
¨
Option 1 (Extension Numbers)
¨
Option 2 (Line Numbers)
¨
Option 3 (Automatic Functions)
¨
Clear All
Option 1:
The user is first required to enter an extension access code. Then 32 extension access
codes are assigned to the keys. Extension access code assignment starts from first
function of first key (the top key on the left side). With one increment for access codes,
initially first functions then second functions of the keys are filled.
Option 2:
The user is first required to enter a line access code. Then 32 line access codes are
assigned to the keys. Line access code assignment starts from first function of first key
(the top key on the left side). With one increment for access codes, initially first
functions then second functions of the keys are filled.
Option 3:
The keys are programmed as shown in the following diagram. Here, “PP” for Private
Pool and “CP” for Common Pool.