Karel MS128, Installation & Maintenance Manual

Page: 69 / 90

Karel MS128 Installation & Maintenance Guide
Edition 3.2
61
III.4. DOORPHONE
•
I
NSTALLATION
:
DY01 Doorphone is designed to be mounted on the wall with a couple of
anchor plugs and screws. For this:
1) Drill two holes, which are 7.5 cm apart.
2) Drive the anchor plugs into the holes.
3) Insert the screws into the anchor plugs.
4) Hang the doorphone on the screws.
The following figure illustrates the installation.
Figure B-17
•
C
ABLING
:
The cable that emerges from the bottom of the DY01 doorphone has a 6-pin RJ
plug at its free end. For connecting the doorphone to the system, the free end of
this cable should be passed through the cable hole on the left cover of the
system cabinet and then, this plug must be attached to the doorphone socket on
the MS128 CPUKON card, as illustrated in the following figure.