Karel MS128 Installation & Maintenance Guide
Edition 3.2
43
II. SYSTEM INSTALLATION
The MS128 system is designed to be mounted on the wall. Hence, the system
comes with a template and a pair of anchor plugs with screws.
The template has the same dimensions with the MS128 system, so that it can be
used to choose the location of the system and to determine the points of the holes
on the wall. The template also has the necessary information to hang the system
on a proper location on the wall, that is the bottom drill holes must be 130 cm above
the floor.
To install the system (see Figure B-1):
1) Place the template on the wall.
2) Drill 2 holes at the points on the template.
3) Drive the anchor plugs into the holes.
4) Insert the screws into the anchor plugs and fix the screws.
5) Hang the cabinet on the wall by placing the two pear holes at the back of the
cabinet over the screws.
Figure B-1
The BPL128 backplane comes already installed in the system cabinet, as fixed to
rear plate of the metal rack by 6 screws, 4 at the corners and 2 in the middle.
Summary of Contents for MS128
