18
selection key. The display reverts to the “Private Pool” menu. The actions explained
above are repeated for the door opener function as well; codes (*151) or (*29) is
entered, then they are confirmed by the right selection key and the operation is thus
accomplished. One reverts to the Key Settings submenu screen by pressing the “Up”
key. Then the user can talk over the door phone or open a door, each by pressing a
single key that s/he has previously chosen.
NOTE:
•
The code required for “Door Phone Conversation” is 110 in the MS48 exchange,
however, capacities smaller than 6/18 require the code 10.
•
On the other hand, the code required for “Door Opener” is 151 in the MS48
exchange, however, for capacities smaller than 6/18, the required code becomes
29.
By the Feature Code Programming Menu: FT20
The entire functions supported by the exchange can be programmed for
FT20
feature
telephone set through the Feature code menu. Any eight-digit code can be assigned to
the programmable keys. That code could be one that is related to user, such as Follow
Me (85), one that is related to the operator, such as Wake Up Service (8389) or one
that is related to the system supervisor, such as entry to the exchange programming
(877777). If the entered code is none of them, then it is taken as an extension number
and this extension number is called directly when this key is used. After accessing the
Key Settings > Feature code submenu, if one of the programmable keys is selected,
one of the corresponding codes is entered for the “no=” option and then if it is
confirmed through the “Accept” key, then the program will have been assigned to the
selected key. (Please refer to the user’s guide of your exchange for information related
to the functions supported by the exchange and the codes to program them.)
By Automatic Programming Menu:
In FT telephone sets, possibility of assigning different functions to the entire keys
simultaneously is provided via the Auto Setting option under the Key Settings menu.
This feature will be explained in detail later in the section “Auto Settings”. Via the
automatic programming, about 20 functions can be programmed for the FT telephone
sets at the same time. These functions can be changed later one by one, as already
explained in the sections above, or they can be cleared through the “Clear All?” option
in the same menu.
