Karel DSS25, Technical Reference And User'S Manual, Page: 15 / 16

DSS25–28 Direct Station Select Module
8
called. (The indices should be entered 3 digits ad “001” because of DS200
Exchange’s properties)
Feature
It provides making use of some functions that have been defined in the system by
pressing a single key. For example, in order for the call requests coming to you to ring
at some other extension, you can press the key that has previously been programmed
and enter the number of the extension, to which you would like your calls to be
forwarded.
Features are listed below:
−
Follow Me Key
−
Call Back Key
−
Do Not Disturb Key
−
Phone Lock Key
−
Conference Key
−
Night Mode (only for operator)
−
Message Listen (if EVM module exists)
−
Page Key
−
Call Collect Key
♦
Press Key: Press the key which is wanted to be programmed.
♦
After that, the feature options menu is reached. The desired feaure is selected
from that menu and it will be confirmed by pressing the “Accept” key. Then the
LED which belongs to key, will turn on. If desired feature is assigned before, this
action will not be accepted.
Feature Code
Any code of 8 digits can be assigned to the programmable keys by using this menu
option.
♦
Press Key: Press the key which is wanted to be programmed.
♦
Code: This code may be one, such as 85 (Follow Me) that could be applied by a
user, one, such as 8389 (Wake Up service) that could be applied by the operator
or one, such as 877777 (Entry to exchange programming) that could be applied by
the system supervisor. If the entered number is none of these, then it is detected
as an extension number and that extension is called whenever that key is used.
NOTÊ: For more information about programming the module, please look at
the Technical Reference and User Guide of your Digital ST Series Telephone.