KARE design F-SP-GF470, Assembly And Operating Instructions Manual

Page: 20 / 32

.
++ +
[EN] QUICK GUIDE
Manual reset / first start-up
Perform a reset by simultaneously holding the up and down buttons pressed for at least
8 seconds. Press and hold the buttons as the desk slowly moves to its lowest level. The
reset is complete when the desk has stopped at the lowest point.
Follow these instructions when adjusting the table height:
1. Ensure that there are no objects in the table height adjustment area.
2. To move the desk up or down, press up or down.
For full stroke, release the down button at the lowest safe point and then press it again for 5 seconds.
The desk will then move to the lowest mechanical height to achieve full stroke.
Saving of preferred standing and sitting position / end positions
Press both buttons three times (with an interval of 0.5-1 second between them). Then press „up“ or „down“
to adjust the position (0.5-1 second). The same applies to your second stored setting. To delete the memory
positions, perform a reset.
Press the Up key until the desired table height is reached.
Press the Down key until the desired table height is reached.
Memory
standing height
Memory
seating height
About storage position
Press for >5 seconds
20