Kärcher WD 3 Car, Original Instructions Manual

Page: 12 / 154

– 7
몇
CAUTION
Pointer to a possibly dangerous
situation, which can lead to mi-
nor injuries.
ATTENTION
Pointer to a possibly dangerous
situation, which can lead to
property damage.
Illustrations on fold-out page!
These operating instructions describe the
multi-purpose vacuum cleaner shown on
the cover page.
When unpacking the product, make sure that no acces-
sories are missing and that none of the package con-
tents have been damaged. If you detect any transport
damages please contact your dealer.
Illustration
 To connect the suction hose during vacuuming.
Illustration
 Position I : Suction or blowing
Position 0 : Appliance is switched off
 To carry the appliance or to remove the appliance
head after unlocking.
Illustration
 To store the mains cable.
Illustration
 Connect the suction hose to the blower connection,
this will activate the blower function.
Illustration
 Pull out to open, push in to lock.
Illustration
 To rest the floor nozzle during work interruptions.
Illustration
 The accessories compartment allows the storage
of suction pipes and suction nozzles on the appli-
ance.
Illustration
 The steering rollers are located in the compartment
when the appliance is delivered. These must be at-
tached prior to starting up the appliance.
Note : Do not use a filter bag for wet vacuuming!
Illustration
 Recommendation : To vacuum fine dust, use the
filter bag.
Illustration
 The cartridge filter must always be installed - with
wet and dry vacuuming.
Note : Let the wet cartridge filter dry prior to using it for
dry vacuuming.
Illustration
 Push the suction hose into the connection on the
appliance, it snaps in place.
 In order to disconnect it, push down with your
thumb and pull the suction hose out.
Note: Accessories, such as suction brushes, can be di-
rectly attached to the connecting piece and thus con-
nected to the suction hose.
For convenient working even in tight spaces.
See position 13.
The removable handle can be attached between the ac-
cessories and the suction hose if necessary.
Recommendation: In order to vacuum the floor, attach
the handle to the suction hose.
Illustration
 Connect the handle with the suction hose until it
snaps in place.
Illustration
 To remove the handle from the suction hose, press
the notch using your thumb and pull off the handle.
Note: Due to removing the handle, accessories can be
directly attached to the suction hose.
Recommendation: In order to vacuum the floor, attach
the handle to the suction hose.
See position 12.
Description of the Appliance
Suction hose connection
ON/OFF switch for appliance
Carrying handle
Cable hook
Blowing connection
Container closure
Parking position
Accessory mount
Steering roller
Filter bag
Cartridge filter
Suction hose with connecting piece
Removable handle
12 EN