-
10
Operator
Work designated with the sign “Operator”
may only be carried out by persons who
have been instructed in the safe operation
and maintenance on the washing system.
Customer Service
Work designated with the sign “Customer
Service” may only be done by the fitters of
Kärcher Customer Service.
In order to guarantee a reliable operation of
the equipment, we success, you signed a
maintenance agreement. Please refer to
your local Kärcher service department.
You can use the wash hall and tile cleaner
RM 841 ASF to clean the wash hall.
Your own safety and the safety of others
demands that the plant is switched off dur-
ing maintenance and service work. Howev-
er, not all plant parts on which maintenance
is being done are freely accessible. This
makes it necessary to move certain plant
parts during maintenance and servicing
work. The “manual mode” is intended to do
this. Manual operation is carried out using
the basic control panel.
Danger
Comply with the following sequence of
working steps for to ensure your own safety
and the safety of others.
Drive the vehicle out of the plant.
Ensure that no persons or animals are
in the plant.
Switch on plant.
Switch on manual operation.
Move plant parts.
Switch off plant and secure against it
switching on again.
Carry out maintenance and servicing
work.
몇
Warning
Risk of damage to the plant and vehicle. Do
not use manual control for washing.
1 Automatic/manual switch
Turn automatic/manual switch to manu-
al position. STOP on the traffic light and
the "Reset" key on the control panel will
start blinking when manual mode is ac-
tive.
Note
Not all manual functions can be executed
with the basic control panel. You need the
Adv. control panel to perform all manual
functions.
The manual functions are divided into
groups 1 through 7.
Press button or button combination
(press simultaneously) to obtain the de-
sired group.
1 Key "Reset"
2 Key "1"
3 Key "2"
4 Key "4"
The blinking sequence of the "Reset" key
and the position traffic light (option) show
the selected group.
Press the "Reset" key briefly.
Press button or button combination
(press simultaneously) to obtain the de-
sired function.
–
I: Function remains active as long as
the corresponding button is pressed.
–
0-I: function is activated the first time
the button is pressed and deactivated
when it is pressed again.
Who may carry out maintenance and
servicing?
Maintenance contract
Cleaning the wash hall
Manual operation
Activate manual operation
Manual mode basic control panel
Select group
Button
Group
1
2
4
1
Roof brush
X
2
Side brush
X
3
High pressure, in-
tensive
X
X
4
Portal
X
5
Water
X
X
6
Signals, card read-
er, traffic light
X
X
7
Frost protection (op-
tional)
X
X
X
Switch off group
Select function
Group 1, roof brush
Button
Function
1
2
4
The roof brush rotates
forward
0-I X
Roof brush rotates
backwards
0-I
X
Lower roof brush
I
X
X
Raise roof brush
I
X
Roof brush/roof bar -
fast drive
I
X
X
Group 2, side brushes
Button
Function
1
2
4
Rotate side-brushes for-
wards
0-I X
Rotate side-brushes
backwards
0-I
X
Move in side-brush 1
I
X
X
Move out side-brush 1
I
X
Move in side-brush 2
I
X
X
Move out side-brush 2
I
X
X
Inching mode, side
brushes
I
X
X
X
Group 3, high pressure, in-
tensive
Button
Function
1
2
4
High pressure roof
0-I X
High-pressure side
0-I
X
Lower the roof bar
I
X
X
Raise the roof bar
I
X
Swivel the roof bar, front 0-I X
X
Swivel the roof bar, rear 0-I
X
X
Intensive, side
0-I X
X
X
Group 4, portal
Button
Function
1
2
4
Portal forwards
I
X
Portal backwards
I
X
Portal fast drive
0-I X
X
(Initialise machine)
I
X
Group 5, water
Button
Function
1
2
4
Dosing pump CTH, front
bow (A)
0-I X
Dosing pump CTH, rear
bow (C)
0-I
X
Foam (B)
0-I X
X
Brush irrigation of proc-
essed water A+B+(C)
0-I
X
Brush irrigation fresh
water A+B
0-I X
X
Post rinse bow fresh
water C
0-I
X
X
Dosing pump shampoo 0-I X
X
X
12
EN
Summary of Contents for TB 36
Page 1: ...TB 36 TB 42 TB 46 TB 50 59637510 1 2 02 19 ...
Page 2: ...2 ...