6
Safety Instructions
ATTENTION!
Do not use the appliance without having
read the instructions for use.
!
Please observe the safety instructions
of your high-pressure cleaner.
!
The T-Racer must not be used by
children.
!
Only trigger the high-pressure jet if the
T-Racer is located on the surface to be
cleaned.
!
There must be no persons in the
immediate vicinity of the cleaning head.
!
Turn off the high-pressure cleaner
during all works at the T-Racer and after
the completion of the cleaning
operation.
!
Maximum water temperature 60°C
(please observe the instructions of your
high-pressure cleaner).
Description of the Appliance
T-Racer
Union nut
Handle
Extension tubes (2x)
Union nut
High-pressure nozzles (2x, grey)
The T-Racer can be used with all Kärcher
high-pressure cleaners from the model year
1992 and later.
The T-Racer is ideally suited for the
cleaning of floor and wall surfaces made of
different materials, such as wood, concrete,
tiles, and natural stone. It has not been
designed for the commercial use.
Selection of the nozzles
For high-pressure cleaners with a
nominal pressure greater than 130 bar
(max. 160 bar).
e.g.:K 6.50 K 7.85
Kärcher 600 Kärcher 770
➜
Use the yellow nnozzles
(premounted).
For high-pressure cleaners with a
nominal pressure less than 130 bar.
e.g.: K 2.01 K 5.85
Kärcher 201 Kärcher 560
➜
Use the grey
nozzles.
To ensure a trouble free operation of your
high-pressure cleaner you must repla-
ce the two yellow nozzles with the grey
nozzles.
Exchange of nozzles (2x)
1. Remove the clip
2. Pull out the yellow nozzle
3. Insert the grey nozzle
4. Re-insert the clip
All manuals and user guides at all-guides.com
