– 11
Turn off the appliance.
Check fresh water container for proper
seating.
Switch the machine back on again.
If the indicator lamp does not go out, re-
peat the procedure (max. 4 times).
Inform Customer Service
Inform Customer Service
Inform Customer Service
Inform Customer Service
Check accessory plug for proper seat-
ing.
Turn off the appliance, wait briefly, turn
on the appliance once again.
Inform the after sales service if the error
reoccurs.
Check accessory plug for proper seat-
ing.
If water gets into the handle, ensure
complete drying.
Turn off the appliance, wait briefly, turn
on the appliance once again.
Inform the after sales service if the error
reoccurs.
Remove clogging from floor nozzle,
steam suction pipe, handle, and steam
suction hose.
Remove clogging from accessories.
If malfunction can not be fixed, the de-
vice must be checked by customer ser-
vice.
The warranty terms published by the rele-
vant sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service centre.
Please submit the proof of purchase.
–
Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
–
At the end of the operating instructions
you will find a selected list of spare parts
that are often required.
–
For additional information about spare
parts, please go to the Service section
at www.kaercher.com.
Indicator lamp "Disturbance"
flashes red
service
error: E01
The "Service" indicator lamp is
yellow and the "Disturbance"
indicator lamp is red at the same
time
service
error: E01
service
error: E07
service
error: E09
service
error: E16
Indicator lamp "Disturbance" is red
service
error: E12
service
error: E13
Insufficient vacuum performance
Customer Service
Warranty
Accessories and Spare Parts
30
EN
