background image

English

13

Note 

The granulate in the cartridge may change colour after 
it comes into contact with water. This depends on the 
mineral content in the water. This discolouration is 
harmless and does not have a negative effect on the de-
vice, cleaning work or the functionality of the decalcifi-
cation cartridge.

Note 

Do not pause for longer than 15 seconds when setting 
as the device will otherwise be set automatically to the 
last selected water hardness or the highest water hard-
ness set during initial start-up. 

1. Connect the mains plug.
2. Make sure that the device is switched off.
3. Press the RESET key and hold it while the device is 

switched on.

Illustration G

After approximately 2 seconds, the indicator light 
flashes and signals the current water hardness set-
ting with the number of pulses.

4. Press the RESET key repeatedly to change the wa-

ter hardness level.

Note

When the RESET key is pressed, the flash pulse for 
the water hardness level is not indicated.

5. Release the RESET key.

The flash pulse for the set water hardness is indicat-
ed.

6. Repeat the process as necessary until the desired 

water hardness level has been achieved.

7. Press and hold the RESET key for 3 seconds to 

save the setting for the water hardness level.
The indicator light for the water hardness lights up.

Care of accessories

(Accessories - depending on scope of delivery)

Note 

The floor cleaning cloth and the cover for the manual 
nozzle have been washed beforehand and can be used 
immediately for working with the appliance. The micro 
fibre cloths are not suitable for dryer.

Note 

When washing the cloths, observe the instructions on 
the washing tag. Do not use any liquid softeners as this 
will affect the ability of the cloths to pick up dirt.

1. Wash the floor cleaning cloths and covers at a max. 

temperature of 60 °C in the washing machine.

Troubleshooting guide

Malfunctions often have simple causes that you can 
remedy yourself using the following overview. When in 
doubt, or in the case of malfunctions not mentioned 
here, please contact your authorised Customer Service.

WARNING

Risk of electric shock and burns

Trying to eliminate faults while the appliance is connect-
ed to the mains or has not yet cooled down is always 
dangerous. 
Remove the mains plug.
Allow the appliance to cool down.

The water shortage indicator light flashes red

The dry-run protection for the pump is deactivated.
1. Switch the device off and back on again.
2. Make sure that the decalcification cartridge has

been inserted correctly and there is sufficient water 
in the reservoir.

The water shortage indicator light lights up con-
stantly in red

No water in the water reservoir.
1. Top up the water reservoir, see chapter Topping up 

the water.

The steam lever cannot be pressed

The steam lever is locked with the child lock.

Set the child lock (selector switch for steam volume) 
to the front.
The steam lever is released.

No / little steam although there is water in the reser-
voir

The decalcification cartridge has not been inserted or 
has been inserted incorrectly.

 Insert the decalcification cartridge or insert it cor-
rectly.

The decalcification cartridge has been removed while 
topping up the water.

Leave the decalcification cartridge in the device 
when topping up.

New decalcification cartridge has been inserted.

Press and hold the steam lever constantly.
The full steam output is reached after approximately 
30 seconds.

Red indicator light "replace descaling cartridge" 
lights up / flashes

Run time of the decalcification cartridge ends soon.

Insert the new decalcification cartridge and reset the
maintenance indicator, see chapter Replacing the 
decalcification cartridge.

The RESET key was not pressed after replacement of 
the decalcification cartridge.

Press and hold the RESET key for 4 seconds after
inserting the decalcification cartridge, see chapter 
Replacing the decalcification cartridge.

Device switches off automatically

Run time for the decalcification cartridge has expired

Insert the new decalcification cartridge and reset the
maintenance indicator, see chapter Replacing the 
decalcification cartridge.

The RESET key was not pressed after replacement of 
the decalcification cartridge.

Press and hold the RESET key for 4 seconds after
inserting the decalcification cartridge, see chapter 
Replacing the decalcification cartridge.

Summary of Contents for SC 3























Reviews: