English
7
Warranty
The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)
Safety devices
몇
CAUTION
Missing or modified safety devices
Safety devices are provided for your own protection.
Never modify or bypass safety devices.
Symbols on the device
(according to type of appliance)
Pressure controller
The pressure controller keeps the pressure in the steam
boiler as constant as possible during operation. The
heating is switched off when the maximum operating
pressure is reached in the steam boiler and is activated
if there is a pressure drop in the steam boiler as a result
of a steam removal.
Safety lock
The safety lock seals the steam boiler from the steam
pressure present. If the pressure regulator is defective
and overpressure occurs in the steam boiler, an pres-
sure relief valve opens in the safety lock and steam
leaks out through the lock.
Prior to restarting the appliance, contact the responsible
KÄRCHER Customer Service.
Safety thermostat
The safety thermostat prevents the device from over-
heating. If the pressure controller fails and the device
overheats, then the safety thermostat switches the de-
vice off.
To reset the safety thermostat, contact the responsible
KÄRCHER Customer Service.
Description of the device
The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
For the illustrations, refer to the graphics page.
Illustration A
1
Safety lock
2
LED lights
Red - mains voltage present and device is heating
up
Green - device is ready for operation
3
Carrying handle
4
Park bracket for floor nozzle
5
Cable clips
6
Mains connection cable with mains plug
7
Holder for accessories
8
Steering rollers, rear (2x)
9
Steering rollers, front (2x)
10
Steam gun
11
Unlocking button
12
Selector switch for steam volume (with child lock)
13
Steam lever
14
Steam hose
15
Spotlight nozzle
16
Round brush (small)
17
**Power nozzle
18
**Round brush (large)
19
Manual nozzle
20
Manual nozzle microfibre cover
21
Extension tubes (2 x)
22
Unlocking button
23
Floor nozzle
24
Hook and loop fastener
25
Microfibre floor cloth (1 x)
26
**Microfibre floor cloth (2 x)
27
Accessory bag
28
**Window nozzle
29
Crevice brush
** optional
Installation
Installing accessories
1. Push the open end of the accessory onto the steam
gun so that the unlocking button on the steam gun
engages.
Illustration G
2. Push the open end of the accessory onto the spot-
light nozzle.
Illustration H
3. Connect the extension tubes with the steam gun.
a Push the 1st Push the first extension tube onto
the steam gun so that the unlocking button on the
steam gun engages.
The connection pipe is connected.
b Push the 2nd extension tube onto the
1st extension tube.
The connection pipes are connected.
Illustration I
4. Push the accessory and / or the floor nozzle onto the
free end of the extension tube.
Illustration J
The accessory is connected.
Risk of burns, surface of appliance be-
comes hot during operation
Risk of scalding from steam
Read operating instructions
