Kärcher RC 3000, Operating Instructions Manual

Page: 25 / 328

English – 25
Observe the robot during the first cleaning cycles. If there are obstacles in the room the
robot cannot cope with, you can remove these obstacles in advance to avoid unwelcome
interruptions of the cleaning process.
Tidy up the rooms prior to the cleaning, do not leave any loose objects on the floor.
Tie up cables, strings, and curtains to prevent the robot from pulling them down.
If you store the appliance for more than 4 months, please make sure that the batteries are
charged completely.
If you let the robot work while you are on the phone or watch TV, activate the quiet mode on
the station.
Room doors should be closed during the cleaning of individual rooms.
If you let the robot clean entire floors, please make sure the robot cannot get stuck behind
the door.
If you want to move the robot to another place, it is recommended to turn off the robot when
it is placed in the station for charging (once the dirt receptacle has been emptied).
Tips and Tricks
Maintenance and Care
Turn off the station and the robot before performing any maintenance work!
Station
Exchanging the filter bag of the station
You must exchange the filter bag if the “Filter full” indicator lamp
(H) lights up.
• Open the filter cover.
• Pull the flap upwards to remove the filter bag from the support.
Place the filter bag into the ordinary refuse for disposal.
• Push the new filter bag into the support until the stop.
Caution: Never operate the appliance without a filter bag! Caution: Never operate the appliance without a filter bag!
Caution: Never operate the appliance without a filter bag! Caution: Never operate the appliance without a filter bag!
Caution: Never operate the appliance without a filter bag!
• Close the filter cover.
Spare filter bag kit: 5 filter bags, 1 motor protection filter
Order no.: 6.904-257
Exchanging the motor protection filter of the charging
station
• If you have replaced the filter bag 5 times, also exchange the
motor protection filter (included in the spare filter bag kit).
Figure 15: Exchange the motor protection filter
Figure 13: Removing the filter bag
Figure 14: Inserting a filter bag
Figure 12: Opening the filter cover