New Unit Information 05.2007
Basic settings and service procedures
Puzzi 8/1 C
Page 24 / 29
Spray nozzle
Spray nozzle on the floor tool
2
Replacing the spray nozzle
The spray nozzle (3) is inserted in the spray tube
(2) and is held by two latching tabs (1) on the left
and right. If it is defective or blocked it can be
replaced as follows:
– Push latch tabs (1) apart (see arrow direction).
– Pull the spray nozzle (3) towards the front and
out of the spray tube (2).
– Push the new spray nozzle into the spray tube
(2), until it audibly latches into position.
1
1 Latch tabs
2 Spray tube
3 Spray nozzle
3
2
3
Spray nozzle on the floor tool
