![background image](http://html.mh-extra.com/html/karcher/prohd-100/prohd-100_original-instructions-manual_654404016.webp)
– 4
– A firm grip impedes blood circulation.
– Continuous operation is worse than an
operation interrupted by pauses.
In case of regular, long-term operation of
the device and in case of repeated occur-
rence of the symptoms (e.g. cold, numb fin-
gers) please consult a physician.
ProHD 200 must only be operated in a hor-
izontal position (power switch at the top).
The other appliance versions can be oper-
ated in the horizontal or upright position.
Note:
The appliance is equipped with a pressure
switch. The motor starts up only when the
lever of the pistol is pulled
Set the appliance switch to "I".
Unlock the trigger gun and pull the lever
of the gun.
Release the lever of the trigger gun; the
device will switch off.
Release again the lever of the trigger
gun; the device will switch on again.
Set the appliance switch to "0".
Disconnect the mains plug from the
socket.
Shut off water supply.
Activate trigger gun until device is pres-
sure-less.
Press the safety lever of the trigger gun
to secure the lever of the pistol against
being released accidentally.
Place the spray lance with the trigger
gun into the quiver for the spray lance
and snap it into place in the spray lance
holder.
Wind the connection cable around the
cable holder.
Fasten the plug with the mounted clip.
Appliances with push handle and
wheels:
Slide in push handle.
Wind up the high-pressure hose and
hang it over the hose storage.
ATTENTION
Frost will destroy the not completely water
drained device.
Store the appliance in a frost free area.
Drain water.
Pump in conventional frost protection
agents through the appliance.
Note:
Use normal glycol-based anti-freezing
agents for automobiles.
Observe handling instructions of the anti-
freeze agent manufacturer.
Operate device for max. 1 minute until
the pump and conduits are empty.
몇
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport it.
Hold the appliance at the carrying han-
dle and the recessed grip for carrying it.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Appliances with push handle and
wheels:
For transport over longer distances, pull
out the push handle to the end position
and drag the appliance behind you
holding the push handle.
In order to climb stairs, pull the appli-
ance up step by step. The skids protect
the casing from damage.
Appliances with carrying belt:
몇
CAUTION
Risk of injury due to machine dropping.
Check the carrying belt for damage prior to
using it.
Put the carrying belt over your shoulder
and carry the appliance.
Attach the connecting piece of the sur-
face cleaner to the holder on the high-
pressure cleaner.
Unscrew union nut.
Note:
With the ProHD 200 the holder can only be
used for a nozzle with screw connection.
Operation
Interrupting operation
Turn off the appliance
Storing the Appliance
Frost protection
If you cannot store it in a frost-free place:
Transport
Holder for surface cleaner
16
EN