Kärcher NT 35/1 Tact Te H, Original Instructions Manual

Page: 24 / 294

– 7
몇
Warning
Do not reuse the main filter element after it
has been removed from the appliance.
Non-detachable filters should only be re-
placed in suitable rooms (so-called decon-
tamination stations) by an expert.
Order no. flat-fold filter: 6.904-242.0
Illustration

Turn the screw in anti-clockwise direc-
tion using a screw-driver and loosen it.

Open filter door.

Take out the flat folded filter.
Illustration

On removing the flat-fold filter, cover
the same immediately with the en-
closed bag and close it.
Order no. bag: 6.277-454.0

Dispose off the used flat-folded filter in
a dust-tight bag according to the statu-
tory provisions.

Remove the dirt that has accumulated
on the pure air side.

Insert new flat-folded filter.

Close the filter door, it must lock into
place.

Fasten the screw of the filter cover us-
ing the screwdriver in the clockwise di-
rection.

Danger
The dust that has been collected should be
transported in dust-proof containers. No re-
filling is permitted. The waste containing
asbestos is to be disposed off according to
the rules and regulations for waste dispos-
al.

Danger
Only persons trained in waste disposal are
permitted to dispose off the dust collection
container.
Illustration

Close the suction connection, see wet
vacuuming.

Release and remove the suction head.
Illustration

Pull over the safety filter sack.
Illustration

Pull out the safety sheet.

Close the safety filter sack using the
self-adhesive flap.

Pull the safety filter sack towards the
rear.
Illustration

Close tightly the opening of the suction
connection of the safety filter sack using
the closing lid.
Illustration

Securely close the safety filter bag with
the attached cable tie.

Remove the safety filter bag.

Wipe the inside of the container using a
damp cloth.

Dispose of the safety filter bag in a dust-
tight bag according to the statutory pro-
visions.
Illustration

Affix a new safety filter bag.
Illustration

Pull the safety filter sack over the con-
tainer.

Insert and lock the suction head.

Release and remove the suction head.

Clean the electrodes with a brush.

Insert and lock the suction head.

Danger
First pull out the plug from the mains before
carrying out any tasks on the machine.
Note:
In case of a failure (e.g. filter break-
age) the appliance must be turned off im-
mediately. The failure must be remedied
before the appliance is put into operation
again.
Replacing the safety filter sack
Cleaning the electrodes
Troubleshooting
23 EN