Kärcher MV 5 P, Manual

Page: 20 / 260

– 9
Illustration
Note
: Do not use a filter bag for wet
vacuuming!
Caution
Always work with an inserted flat fold
filter - during wet as well as dry vacuum
cleaning!
Illustration

Push the suction hose into the con-
nection on the appliance, it snaps in
place.

In order to disconnect it, push down
with your thumb and pull the suction
hose out.
Note: Accessories, such as suction
brushes (optional) can be directly at-
tached to the connecting piece and
thus connected to the suction hose.
For convenient working even in tight
spaces.
The removable handle can be attached
between the accessories and the suc-
tion hose if necessary.
See position 18.
Recommendation: In order to vacu-
um the floor, attach the handle to the
suction hose.
Illustration

Connect the handle with the suction
hose until it snaps in place.
Illustration

To remove the handle from the suc-
tion hose, press the notch using
your thumb and pull off the handle.
Note: Due to removing the handle, ac-
cessories can be directly attached to
the suction hose.
Recommendation: In order to vacu-
um the floor, attach the handle to the
suction hose.
See position 17.
Illustration

Put both suction pipes together and
connect them with the handle.
Illustration
For convenient switching between dry
and wet dirt:

For vacuuming dry dirt off the floor,
use position with extended brush
strips.

For vacuuming water off the floor,
use position with extended rubber
lips.

For edges, joints, heaters and hard
to reach locations.
Illustration

To connect the suction hose with an
electric tool.

Adapt the adapter to the connection
diameter of the electric tool using a
knife if necessary.
Illustration

For more flexibility when working
with electric tools.
Note : Can also be used with an
adapter.
Filter bag
Flat fold filter
(already installed in the appliance)
Suction hose with connecting
piece
Removable handle
suction pipes 2 x 0.5 m
Floor nozzle
(with switching lever)
Crevice nozzle
Adapter
Flexible tool hose
20 EN