Kärcher MV 5 P, Manual

Page: 19 / 260

– 8

Position 0 : The appliance is
switched off. Electric tool is sup-
plied with voltage.
Note
: Observe the maximum connect-
ed load (see Chapter "Technical da-
ta").
Illustration

To connect an electric tool.
Illustration

Connect the suction hose to the
blower connection, this will activate
the blower function.
Illustration

For cleaning the flat pleated filter fit-
ted.
Note: Do not operate the button when
the flat pleated filter is wet.

After unlocking it, grab the appli-
ance head by the handle recess
and remove it.
Illustration

The carrying handle is also used to
lock the appliance head and the
container. To unlock, push the bow
all the way forward until you clear
the lock.

Grab the appliance head by the
handle recess and remove it.

The accessory compartment allows
the storage of suction nozzles on
the appliance.
Illustration
Note : This accessory compartment is
required in addition to the application
of the integrated filter cleaning system.
Illustration
Illustration

In order to clean the filter, press the
release key, fold out and remove
the filter box.
Illustration

The accessories compartment al-
lows the storage of suction pipes
and suction nozzles on the appli-
ance.
Illustration

To store the mains cable.
Illustration

To rest the floor nozzle during work
interruptions.
Illustration

Turn the container, press in the
steering roller in the openings at the
base of the container till the end-
point.
Illustration

The drain screw is used to quickly
and comfortably empty wastewater
in the container. Tilt the container
forward for easier emptying.
Machine socket
Blowing connection
Filter cleaning button
Recessed grip
Carry handle
Accessory compartment, appli-
ance head
Filter box and release key
Accessory mount
Cable hook
Parking position
Steering roller
Drain screw
H
2
19 EN