7
5.959-660
1. Important notes
Before putting into operation, please observe the
following points:
• Inform your dealer immediately if there is any
transport damage.
• Completely remove the accessories from the
carton.
• Only operate the suction unit from a suitable
socket outlet with earthing contact . Refer to
the Technical data for the necessary mains
fuse.
• The suction unit is not suitable for sucking up
hazardous dusts such as asbestos. Please
consult your Kärcher branch or your Kärcher
dealer with regard to such applications.
Safety instructions
Please observe the following safety instructions.
• Unplug the mains plug from the socket before
performing any maintenance work.
• Always check the mains cable for damage or
signs of ageing before use.
• Do not use the suction unit if the mains cable is
not in perfect condition.
• Remember: never damage the mains cable by
driving over it, crushing it, pulling it hard etc.
• Only a skilled electrician or your authorized Kär-
cher customer service center may replace the
mains cable.
Only use the original cable H05 VV - F 2x1 (Or-
der No. GB: 6.647-264; AUS: 6.647-266).
CAUTION!
Never suck up:
• hot ashes
• explosive liquids
including petrol, paint thinner or heating oil,
since explosive vapors form when they swirl
together with the suction air.
• acetone
• undiluted acids and solvents
B1
Electrodes
C1
Interference suppression capacitor
M1
Suction turbine
N1
Interruption electronics
S1
Switch, turbine
X1
Plug
2. Technical Data
Mains connection
240
V
1~50/60
Hz
Power consumption
4.4
A
Mains fuse (slow-blow)
10
A
Power (suction turbine):
Power P
NOM
1200
watt
Power P
MAX
1380
watt
Air volume
78
l/s
Vacuum
178
mbar
Capacity
- Solids
35
l
- Liquids
25
l
Sound level
73
dB (A)
Length
480
mm
Width
380
mm
Height
550
mm
Weight approx.
7.5
kg
We reserve the right to make technical modifi-
cations
Circuit diagram
BT_660GB.PM6
08.02.01, 14:10
7
