Kärcher MC 250, User Manual

Page: 32 / 132

32 English
Adjusting the side inclination
1
Screw 1
2
Screw 2
2. Unscrew the screws.
3. Adjust the side inclination via the rotation point of screw
1.
4. Tighten the screws.
Adjusting the head inclination forwards
1
Lock nut
2
Hexagon
5. Unscrew the counternut.
6. Adjusting the head inclination via the hexagon.
7. Tighten the counternut.
Adjusting the brush contact pressure
8. The brush system has a hydraulic brush contact pres-
sure adjustment system.
1.4.10Storage
몇 WARNING
Risk of injury and damage
Note the weight of the device.
ATTENTION
Risk of damage
Store the attachment kit in a protected, level and dry place.
Ensure that the sweeping brushes are not loaded.
1. Remove the sweeping system from the vehicle, then re-
move the sweeping brushes and store the sweeping
system on the pallet.
2. Ensure that the sweeping brushes are not loaded during
attachment to the vehicle.
1.5 Sweeping mode
1.5.1 Symbols on the display during sweeping
The following symbols and warning indicators are also
shown on the display during sweeping.
1.5.2 Fill the fresh water tank / recycling water tank
1
Left side panel
2
Filler neck with cover
3
Fresh water tank cap
4
Manual suction hose flap/overflow protection
Note
The open flap of the manual suction hose provides over-
flow protection when filling
1. Swing the left side panel outwards.
2. Remove the cover from the filler neck and attach a suit-
able water supply hose.
3. Unscrew the fresh water tank cap.
4. -Open the manual suction hose flap
1
Filler neck with cover
Suction mouth is down (lowered)
Suction mouth camera activated
The waste container is raised