background image

2

IMPORTANT PRECAUTIONS – Read First!

Safety Warnings

When using this product, basic precau-
tions should always be followed:
• Read all the instructions before using 

the product.

• High pressure jets can be dangerous 

if subject to misuse. The jet must not 
be directed at persons, animals,
electrical devices, or the machine itself.

• To reduce the risk of injury, do not

operate the machine near children.

• Learn how to stop the machine and 

release pressure quickly. Be thoroughly
familiar with the controls.

• Stay alert — watch what you are doing.
• Wear safety goggles.
• Do not use acids,

solvents, or any
flammable material in this product.
These products can cause physical
injuries to the operator and irreversible
damage to the machine.

• Do not operate the product when 

fatigued or under the influence of 
alcohol or drugs.

• Do not stand on unstable surfaces.

Stand with both feet balanced at all
times.

• To reduce the risk of electrocution, keep

all connections dry and off the ground.
Do not touch plug with wet hands.

• The Gun Safety Lock PREVENTS 

the trigger from accidentally being
engaged. This safety feature DOES
NOT lock trigger in the on position.

Extension Cords

Use a sufficient gauge: Up to 25 ft = 12/2
AWG; 25 to 50 ft = 10/2 AWG. Use only
extension cords that are intended for
outdoor use. These extension cords are
identified by the marking “Acceptable for
use with outdoor appliances; store indoors
while not in use.” Use only extension cords
having an electrical rating not less than the
rating of the product. Do not use damaged
extension cords. Examine extension cord
before using and replace if damaged. Do
not abuse extension cord and do not yank
on any cord to disconnect. Keep cord away
from heat and sharp edges. Always

disconnect the extension cord from the
receptacle before disconnecting the
product from the extension cord. If you are
using an extension cord, it should always
be completely unwound from the cable
drum.

Ground Fault Circuit Interrupter
(GFCI) Protection

This unit is supplied with a portable
Ground Fault Circuit Interrupter (GFCI).
UL indicates that the power cord has been
investigated for compliance with the
applicable provisions of UL 943, Third
Edition (Standard for Ground Fault Circuit
Interrupters) and other applicable
standards. If power is interrupted in the
line, the GFCI will automatically reclose
the circuit to the load after power is
restored. Depending on the GFCI model,
it may be necessary to manually operate
the reset button to restore power to the
GFCI load circuit.

This Product Is 
Double Insulated

In a double-insulated product, two
systems of insulation are provided instead
of grounding. No grounding method is
provided on a double-insulated product,
nor should a method for grounding be
added to the product. Servicing a double-
insulated product requires extreme care
and knowledge of the system, and should
be done only by qualified service
personnel. Replacement parts for a
double-insulated product must be identical
to the parts they replace.
A double-insulated product is marked with
the words, “DOUBLE INSULATED.”

Caution

•  Follow the maintenance instructions

specified in the manual.

This machine has been designed
for use with cleaning detergents
supplied or recommended by the
manufacturer. The use of other
cleaning detergents may affect the
operation of the machine and void
the warranty.

Summary of Contents for K360 M













Reviews: