Kärcher K3 Induction, Instructions Manual

Page: 11 / 28

English 11
Operation with detergent
몇 WARNING ● Incorrect use of deter-
gents can cause serious injuries or poison-
ing.
몇 CAUTION ● Keep the detergent out of
the reach of children. ● Only use the deter-
gents supplied or specified by the manufac-
turer. The use of other detergents or
chemicals can impair the safety of the de-
vice.
Foam nozzle
1. Fill the detergent solution in the deter-
gent tank of the foam nozzle (observe
dosage instructions on the packaging of
the detergent).
2. Connect the detergent tank to the foam
nozzle.
3. Connect the foam nozzle to the trigger
gun, and turn the foam nozzle by 90° to
lock it.
Recommended cleaning method
1. Spray the detergent sparingly on the dry
surface, and allow the detergent to re-
act, but not to dry.
2. Spray off loosened dirt with the high
pressure.
After operation with detergent
1. Flush the device with clear water for ap-
prox. 30 seconds.
Finishing the operation
Note
Separate the high-pressure hose from the
trigger gun or the appliance when there is
no pressure in the system.
1. Switch the appliance on.
2. Push the lever of the trigger gun until no
more water is emitted.
3. Release the lever on the trigger gun.
4. Switch the appliance off.
5. Unplug the power cable from the power
supply.
6. Press the lever on the trigger gun to re-
lease any remaining pressure in the sys-
tem.
7. Lock the lever of the trigger gun.
a.
a.
b.
b.
a.
a.
b.
b.