background image

English

 7

Caution

Use the high pressure cleaner only when 
you have mounted the water filter.
Never operate the high-pressure cleaner 
when the tap is turned off as dry running will 
damage the high-pressure pump.

Î

Unwind the high pressure hose from the 
hose drum.

Î

Push the spray lance into the trigger 
gun and fasten it by turning it through 
90°.

Î

Completely open the water tap.

Î

Insert the mains plug into the socket. 

Î

Turn on the appliance “I/ON”.

Danger

The trigger gun is subjected to a recoil force 
when the water jet is discharged. Make 
sure that you have a firm footing and are 
also holding the trigger gun and spray lance 
firmly.

Î

Illustration 

 (see page 13)

Unlock the lever on the trigger gun.

Î

Pull on the lever of the trigger gun; the 
device will switch on.

Note:

 Release the lever of the trigger gun; 

the device will switch off again. High pres-
sure remains in the system.

Carrying out the most common cleaning 
tasks. The work pressure can be stageless-
ly regulated between "Min" and "Max".

Î

Release the lever on the trigger gun. 

Î

Turn the spray lance to the desired po-
sition.

For particularly dirty items or areas.
Not suitable for use with detergents.

We recommend the KÄRCHER cleaning 
and care program that will match the re-
spective cleaning requirements. Please 
seek consultation or request information on 
the subject.

Î

Fill the detergent solution in the deter-
gent tank (observe dosage instructions 
on the packaging of the detergent).

Î

Adjust the suction volume of the deter-
gent solution by means of the dosage 
regulator for detergents.
- Medium quantity: Central position
- Large quantity: "+" position
- Small quantity: "-" position

Î

Use spray lance with pressure regula-
tion (Vario Power).

Î

Turn the spray lance to "Mix" position.

Note:

 This will mix the detergent with 

the water stream.

Î

Spray the detergent sparingly on the 
dry surface and allow it to react, but not 
to dry.

Î

Spray off loosened dirt with the high-
pressure ray.

Î

Release the lever on the trigger gun.

Î

Illustration 

 (see page 13)

Lock the lever on the trigger gun.

Î

During longer breaks (more than 5 min-
utes), also turn the appliance off using 
the "0/OFF" switch.

Î

Insert the trigger gun in its holder.

Start up

Operation

Spray lance with pressure regulation

Spray lance with dirt blaster

Working with detergent

Recommended cleaning method

Interrupting operation

Summary of Contents for K 6.85 M

















Reviews: