background image

English

Caution

„

Observe a distance of at least 30 cm 
when using the jet to clean painted sur-
faces to avoid damaging paintwork.

„

Never leave the appliance unattended 
when it is in operation.

„

Make sure that the power cable or ex-
tension cables are not damaged by run-
ning over, pinching, dragging or similar. 
Protect the power cable from heat, oil, 
and sharp edges.

„

All current-conducting parts in the work-
ing area must be protected against jet 
water.

„

The appliance may only be connected 
to an electrical supply which has been 
installed in accordance with IEC 60364.

„

The appliance may only be connected 
to alternating current. The voltage must 
correspond with the type plate on the 
appliance.

„

The maximum tolerable mains imped-
ance at the electrical contact point (see 
Technical Data) must not be exceeded.

„

For safety reasons, we recommend that 
you operate the appliance only via a 
earth-leakage circuit breaker (max. 
30 mA).

„

Cleaning operations which produce oily 
waste water, e.g. engine washes, un-
derbody washes, may only be carried 
out using washing stations equipped 
with an oil separator.

„

This appliance was designed to be 
used with detergents which are sup-
plied or recommended by the manufac-
turer. The use of other detergents or 
chemicals may compromise the safety 
of the appliance.

When unpacking the product, make sure 
that no accessories are missing and that 
none of the package contents have been 
damaged. If you detect any transport dam-
ages please contact your dealer. 

Illustrations on Page 5

1 Coupling element for water connection
2 Waterfilter
3 Fine filter in the water connection
4 Storage for accessories
5 Water connection
6 Appliance switch "0/OFF“/ „I/ON“
7 Storage for trigger gun
8 Transport handle
9 Detergent suction hose (with filter)
10 Dosage regulator for detergent
11 Detergent Tank
12 Storage for mains connection cable
13 Mains cable with mains plug
14 Storage for spray lance
15 Hose drum
16 hand crank for hose drum
17 Bearing wheel
18 High pressure hose
19 Trigger gun
20 Lock trigger gun
21 Key to detach the high-pressure hose 

from the trigger gun

22 Spray lance with pressure regulation 

(Vario Power)

23 Storage for accessories

Special accessories expand the possibili-
ties of using your appliance. Please contact 
your KÄRCHER dealer for further informa-
tion.

Operation

Description of the Appliance

Special accessories

Summary of Contents for K 6.85 M

















Reviews: