background image

9

CLEANING TIPS – 

continued

Barbecue Grills, Outdoor Power
Equipment & 
Gardening Tools 

(with or without detergent)
Pre-rinse cleaning surface with fresh water. If
using Kärcher All Purpose Cleaner or
Degreaser, place detergent  suction tube
directly into cleaning solution and apply
detergent at low pressure. Allow Kärcher
detergent to remain on surface 1-3 minutes.
Do not allow detergent to dry on surface.
Rinse at high pressure keeping the spray
nozzle approximately 3-6 inches from the
cleaning surface. For removing extremely
stubborn dirt, it may be necessary to move
the spray nozzle even closer to the surface
for greater dirt cutting action. To remove
caked on mud from garbage cans, lawn
mower blades, wheel barrels or other 
non-sensitive metal surfaces, you may 
want to use the Karcher Dirtblaster

®

Wand.

Patio & Lawn Furniture

(with or without detergent)
Pre-rinse furniture and surrounding area with
fresh water. If using Kärcher All Purpose
Cleaner, place detergent suction tube direct-
ly into cleaning solution and apply to surface
at low pressure. Allow Kärcher All Purpose
Cleaner to remain on surface 1-3 minutes.
Do not allow detergent to dry on surface. If
needed use special Wash Brush Attachment
to remove stubborn dirt. Rinse at high pres-
sure in a sweeping motion keeping the spray
nozzle approximately 3-6 inches from the
cleaning surface. For best results, clean from
top to bottom and from left to right.

Recommendations

• Before cleaning any surface an inconspicu-

ous area should be cleaned to test spray
pattern and distance for maximum cleaning
results.

• If painted surfaces are pealing or chipping,

use extreme caution as pressure washer
may remove the loose paint from the 
surface.

OPTIONAL CLEANING ACCESSORIES               

• Wash Brush
• House Washing Wand
• Extension Wand
• Dirtblaster

®

Wand

• Flexible Spray Wand
• Underbody Spray Wand

• Telescopic Spray Wand
• Pipe Drain Cleaner
• Detergent Foamer Attachment
• Water Suction Hose
• Extension Hose 25’
• Rotating wash brush

Optional cleaning accessories are available to further enhance your cleaning capabilities:
See accessories order form for product descriptions and ordering instructions.

In USA Call:

1-800-537-4129

or visit our website: www.karcher-usa.com

Summary of Contents for K 502













Reviews: