background image

English

 5

„

Never leave the appliance unattended 
when it is in operation.

„

Make sure that the power cable or ex-
tension cables are not damaged by run-
ning over, pinching, dragging or similar. 
Protect the power cable from heat, oil, 
and sharp edges.

„

The connection between the power ca-
ble and extension cable must not lie in 
water.

„

All current-conducting parts in the work-
ing area must be protected against jet 
water.

„

The appliance may only be connected 
to an electrical supply which has been 
installed in accordance with IEC 60364.

„

The appliance may only be connected 
to alternating current. The voltage must 
correspond with the type plate on the 
appliance.

„

The minimum fuse rating required at the 
socket outlet is 13 A (slow-blow).

„

To avoid accidents due to electrical 
faults we recommend the use of sockets 
with a line-side current-limiting circuit 
breaker (max. 30 mA nominal tripping 
current).

„

The plug and coupling of the extension 
cable used must be watertight.

„

Always fully unroll electrical cables from 
the cable drum.

Safety devices serve to protect the user 
and must not be rendered inoperational or 
their functions bypassed.

The switch prevents unintented starting of 
the appliance. Stop the appliance during 
breaks or after operation.

The safety catch on the handgun prevents 
the appliance from being switched on unin-
tentionally.

Safety Devices

Power switch

Safety catch

Summary of Contents for K 5.91 MD













Reviews: