background image

English

 7

Î

Turn Vario Power nozzle until low pres-
sure setting (Mix) has been reached. 

Î

Fill the detergent reservoir with, deter-
gent tablet and water or detergent con-
centrate and water (o

bserve metering 

recommendations on the packaging la-
bel of the detergent).

Î

Turning the regulator to the left: Deter-
gent is added from the left detergent 
tank.

Î

Turning regulator to the right: Detergent 
is added from the right detergent tank.

1 Spray a small dose of the detergent on 

the dry surface, and allow it to react 
(make sure the detergent does not dry 
up).

2 Wash off the loosened dirt using the 

high-pressure jet.

To ensure a trouble-free operation of the 
appliance and to match the individual 
cleaning task, we recommend our Kärcher 
detergent and maintenance agents. Please 
ask for our advice, or request information 
on the products.

Î

Release the lever on the handgun.

Î

During breaks, use the safety catch to 
secure the handgun lever.

Î

During longer breaks (more than 5 min-
utes), also turn the appliance off using 
the ON/OFF switch.

Î

If detergent has been added: 
Fill detergent tank with clear water, 
switch the appliance on for approxi-
mately one minute once the spray lance 
has been removed and rinse until water 
runs clear.

Î

Release the lever on the handgun.

Î

Set the appliance switch to "0/OFF“.

Î

Turn off tap.

Î

Press the lever on the handgun to re-
lease any remaining pressure in the 
system.

Î

Disconnect the appliance from the wa-
ter supply.

Î

Detach spray lance from the handgun

Î

Switch the appliance on ("I/ON“), press 
the handgun lever until no further water 
is discharged (approx. 1 min).

Î

Set the appliance switch to "0/OFF“.

Î

Use the safety catch to secure the 
handgun lever.

Î

Pull out the mains plug.

Î

Store the power cord, the high pressure 
hose and the accessories on the appli-
ance.

Risk of electric shock

Always switch off the appliance and pull out 
the mains plug before care and mainte-
nance work.

Prior to longer periods of storage, e.g. in the 
winter:

Î

Pull out the fine filter in water connec-
tion using flat-nose pliers and clean with 
running water.

Î

Remove filter from suction hose for de-
tergent and clean with running water.

The appliance is maintenance-free.

Frost can destroy the not completely 
drained appliance. Store the appliance in a 
frost resistant room during winter.

Only use original Kärcher spare parts. You 
will find a list of spare parts at the end of this 
document.

Detergent infeed from detergent tank

Detergent metering regulator

Recommended Cleaning Method

Detergents

Interrupting operation

Finish operation

Maintenance and care

Cleaning

Maintenance

Frost protection

Spare Parts

Summary of Contents for K 5.91 MD













Reviews: